I figured out the best place to move the 12V aux battery to would be under the rear seats. Just take out the air compressor and filler bottle and you have a perfect spot to install a nice 12V LiFePO4 battery:
Before:
https://www.dropbox.com/s/pz3zv74z3pogatn/2015-04-08%2015.19.25.jpg?dl=0
After:
https://www.dropbox.com/s/1kda8s3wnmp0yxo/2015-04-08%2019.45.55.jpg?dl=0
https://www.dropbox.com/s/hcrvtywjf2lk249/2015-04-08%2019.48.22.jpg?dl=0
https://www.dropbox.com/s/7ch7yncunov8o1c/2015-04-08%2019.48.29.jpg?dl=0
Red 16mm2 cable comes from the original battery positive connector in to the cabin through the grommet below the center console, beneath the carpet in the passenger footwell and along the passenger side inside the plastic cover panels:
https://www.dropbox.com/s/0bvlpozouhvc78w/2015-04-08%2016.13.24.jpg?dl=0
https://www.dropbox.com/s/3ass11bfuwl0g10/2015-04-08%2016.22.55.jpg?dl=0
https://www.dropbox.com/s/tkjoit3299cttpz/2015-04-08%2016.22.51.jpg?dl=0
I have installed a Binar ethanol burning heater where the original lead acid (yuck) battery was.
Before:
https://www.dropbox.com/s/pz3zv74z3pogatn/2015-04-08%2015.19.25.jpg?dl=0
After:
https://www.dropbox.com/s/1kda8s3wnmp0yxo/2015-04-08%2019.45.55.jpg?dl=0
https://www.dropbox.com/s/hcrvtywjf2lk249/2015-04-08%2019.48.22.jpg?dl=0
https://www.dropbox.com/s/7ch7yncunov8o1c/2015-04-08%2019.48.29.jpg?dl=0
Red 16mm2 cable comes from the original battery positive connector in to the cabin through the grommet below the center console, beneath the carpet in the passenger footwell and along the passenger side inside the plastic cover panels:
https://www.dropbox.com/s/0bvlpozouhvc78w/2015-04-08%2016.13.24.jpg?dl=0
https://www.dropbox.com/s/3ass11bfuwl0g10/2015-04-08%2016.22.55.jpg?dl=0
https://www.dropbox.com/s/tkjoit3299cttpz/2015-04-08%2016.22.51.jpg?dl=0
I have installed a Binar ethanol burning heater where the original lead acid (yuck) battery was.