Recent content by ion75

Sorry for the late reply, I haven't been home for the past few days. Of course, it is impossible to miss this very complete post! however I have not seen a case similar to mine (i.e. no DTCs returned by the OBC and with the DC/DC part functional). I haven't opened the OBC yet, I'll definitely...

good news DC/DC converter is fine 14.4V. I don't really know where to start now to solve the AC charging issue.

Strangely after the deletion of the previous errors I did not see any other errors coming up (maybe have to wait a bit ?). However, when I select OBC and request a fault reading, Diagbox indicates a communication error with the ECU. there is certainly also a problem with the communication of...

After a long session of scrutinizing the cables, nothing suspicious. I then resigned myself to try a meter swap (with a fonctionnal one) and there I managed to start and have the READY state. AC charging still does not work. I took the opportunity to try a DC charge which worked perfectly...

OK, I'll take a look at the wiring harnesses with a flashlight. The vehicle was running normally (every day) before this charging attempt. No modification made on the vehicle. Charging did not work at all and seems to be the cause of the failure. It was not the usual EVSE (T1/domestic 10A...

hello kiev, Thanks for the feedback ! the 12V battery was charged before testing. I took the measurements today voltage is still above 12.5 Lock 12,79 ACC 12.74 ON 12.64 START 12.60 Yes MCU fuse Under the cover Nobody else but me. i checked the harnesses (under the rear seat and under...

Hello ! I'm new here, I tried to find in the forum posts a solution to my problem without success. I am currently having issues with my 2011 Peugeot Ion (which broke down following a charging attempt last week) - The vehicle refuse to go to ready mode. - AC charging does not work (the...