Search results

I agree with you!

Simple calculation : I drive a Peugeot 307 with autogas: year costs with taxis : 75euro (gas)x12 (months) = 900 euro + 260euro (taxis/year)=1160 As for service I do it my self most of the part so I need 100 euro per year for it. 1160 + 100=1260 so 1260 x15 years = 15120 euro. Peugeot ion: No...

If you swap the battery under guaranty then I agree with you that the car is economical to drive! otherwise, I don t think so! At least now. Maybe in the future when the cost of the battery falls to 6000 euro or so then it is economical to drive this car

You were lucky to repair it yourself! My problem with my OBC is not 2 blown capacitors and some resistors! I charge my ION also with sollar or at my work but 10.000 euros for a battery must be considered to the cost of driving this car and nobody talks about it! Economic is when you buy this...

Hallo Joe5, Please tell me where is the fuel economy if you pay 10000 euro on a battery after 15 years! I have bought the Peugeot ion (used 22.000Km) for 12.000 euro I charged with solar power, I have never charged with a fast charger and now I can make only 80Km without heat and air...

Economical is when you pay for the battery 5000 euros or so and not 10.000. Eventually, you will change the battery and for every penny you saved on gasoline you will pay it to Mitsubishi! And pray until then that everything is going well with your car!

Another question : If the resistors are bad! Can you via a tool communicate with the OBC or not?

Hi, This Car is not economical !!! They simply shift the gasoline costs that the gas station takes to the manufacturer (In this case Mitsubishi ) ! The charger goes bad after 8 years or so and you must pay 4000 euro for another! The battery must be changed after 15 years or so and cost until yet...

Hi, This Car is not economical !!! They simply shift the gasoline costs that the gas station takes to the manufacturer (In this case Mitsubishi ) ! The charger goes bad after 8 years or so and you must pay 4000 euro for another! The battery must be changed after 15 years or so and cost until yet...

?

Yes, I think you Have right! So what does the dealer mean by telling me he can not communicate with the OBC ?

Hello again, I have a question When the dealer says we can t communicate with OBC, does that mean the Upper board has fail? And What is the surface mount element X501 on the top upper board near the high voltage section?

Have you ask Kiev.? a member here about your problem! Send him a personal message! he has more experience I think!

It is 50/50 !!! The resistors don t blow the thermal fuse in one of the resistors is triggered! From my experience, it happens sometimes without reason in some devices if the thermal fuse has continuous stress from heat! I will put them outside of the case because they produce heat and heat is...

Thanks for the photo! I measure the points and found that I have not 9.4 ohms. So I gently destroy the resistors and found out that the big resistor has a thermal Fuse inside and this fall! These resistors must never put there from the beginning! They must be placed outside the charger because...

sandrosan, Sorry that I can not understand the meaning of <<<and the output on the white jumper with faston>>> Can you send me a picture with a mark of this faston clip ! You can directly send it to my email adress if you can not post it here! Thanks [email protected]

hallo, Sandrosan and welcome to the forum! I have not the solution for you but I have a question! How can you measure and tell that the resistors go bud? Are there visual black spots or so on the resistors or you measure them after you desoldering this big plate?

Why it is so risky to swap the plates to see what functions and what not? And yes I swap plates in TVs (Same model) to find the problem and it always worked! If I repair Succesful my charger I will post pictures ( here and on youtube ) of all the parts that ever have failed at those chargers so...

And 1 more think, It will be easier to track the problem if everybody at the and tell what did they do to fix the charger! With few word! Problem …..>solution! Another solution that I suggest is, that the charger has 3 motherboard so what defective parts has been changed until yet in the first...

It is so many where to begin and where to end! I am a Pc technician and electronic guy, so I have some experience with boards but I have no similar issues like the fellows here! at least I think so because I have no trouble codes! But the question is is it safe to interchange the borts between...