Recent content by AleksM

hobdrive can align cells, but for a very long time, approximately 0.005v per charge. but you need to keep the program open and press the calibration if it turns off. straightens my 8 cells for 2 months, and for a long time he will do it. with full 4,100v in 80 cells, 8 replaced cells and today...

transplantation is successful , but until the voltage equalizes the cells, the capacity is not recalculated

mistaken, Replaced 8 cells.

mistaken, Replaced 8 cells.

Replaced 4 cells. https://www.drive2.ru/l/531427780760437096/ working scanner with great functionality https://www.drive2.ru/l/530716671615172946/

Replaced 4 cells. https://www.drive2.ru/l/531427780760437096/ working scanner with great functionality https://www.drive2.ru/l/530716671615172946/

canion expensive I plan to buy new cells and change them in whole modules of 8-16 pieces, approximately 8-16 pieces per month figures translated into the schedule

But the fact that the cells do not fall to the required level of 2.8 V is also caused by a bad cell ?? and what can be done now? It is believed that if you replace one new element, the device will stop charging, is it true?

Thank you, I understand that this is the assembly of lev50 4s tell me to change one or 4 pieces at once? 8 pieces? Are these cells suitable for replacement? https://item.taobao.com/item.htm?spm=a230r.1.14.28.576d3618Bhcyvn&id=547637580633&ns=1&abbucket=10#detail

Good afternoon, sorry for my english writing through a translator. Who can tell what's going on with my battery, I attach 4 pictures, the first 2 are completely discharged before the battery is disconnected. The following pictures are fully charged. car of the year 2011, 68000km, on the...