Here are the co-ordinates for the iMIEV's motor bolt holes i used to machine my adapter plate... thought this could be useful to others if anyone decides to do an iMIEV transplant too.
The co-ordinates are from top right to top left (clockwise) when looking at the face of the plate that will meet with the motor.
0,0 being the center of the motor shaft
C/B is counter bored 14mm wide (5mm deep for alignment pins)
format: X / Y ~ hole size in mm
71.95 / 113.4 ~ 11.1mm C/B
107.4 / 0.01 ~ 11.1mm
30.24 / -103.055 ~ 11.1mm
-101.74 / -90 ~ 9mm C/B
-134.4 / 15.225 ~ 9mm
-71.95 / 113.341~ 9mm
for pics and more detail:https://318iev.blogspot.com/2020/07/mot ... nates.html