Don wrote:Are they really Phillips head, or (more likely) tamper proof Torx screws?? The make 'tamper proof' Torx screws which have a little pin in the center, so a standard Torx bit won't fit. The special tamper proof Torx bits have a hole drilled in the center to accommodate that little pin. You can buy a set of the bits fairly cheaply from Lowes or maybe NAPA. They come in the same sizes as regular Torx bits - T-10, T-15, T-20 etc. Ask if you're unsure
Actually, they are regular torx screws. At first I couldn't find the L. side torx at first because the steering has to be straightened out for both screws to be visible. Duhh! Pulled off the old airbag this a.m.
* * * *
Here is a list of Mitsubishi cars with what appears to be the same driver side airbag configuration as the IMIEV. I looked up images of various Mitsu cars interiors on Google, and it was pretty obvious which airbags were the same.
Lancer 2008 - 2017
Pejaro Sport 2009 - 2015
It's possible that some models vary, though.