snapshot of CaniOn screen...

Mitsubishi i-MiEV Forum

Help Support Mitsubishi i-MiEV Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

tigger19687

Well-known member
Joined
Feb 10, 2015
Messages
559
Location
MA
So somehow I got a pic of a screenshot of my CaniOn on my phone's Pic album.
I have no idea how it happened.

Anyone know how to do this ?

Kinda sounds dumb, but I have no idea how it happened in the 1st place. And I would like to take a few snapshots of a few screens here and there.

Mainly want to snap the Temp on #64
 
If you tap on the specs on the left hand side (SoC, Volts, Amps, etc), that will take a screenshot of the app. It will show a notification over the app of printscreen OK or something similar.
 
Just so you know... Those temperatures are not really of the cells, but are groups of three temperature measurements from the 22 LEV50-4 module monitoring boards. One temp is the monitoring chip's internal temp and the other two are thermistors on the circuit board.

i'm collecting notes to reverse engineer the module boards here: kiev's blog
 
PV1 said:
If you tap on the specs on the left hand side (SoC, Volts, Amps, etc), that will take a screenshot of the app. It will show a notification over the app of printscreen OK or something similar.

Thanks, there are no "instructions" and couldn't figure out how I did it.
Computer geek, yes, smartphones, no :oops:

Thanks Kiev
 
Back
Top