PV1
Site Moderator
Posts: 2990
Joined: Fri Apr 27, 2012 4:22 pm
Location: Pittsburgh, PA
Contact: Website

Re: OVMS for Mitsubishi i-Miev, Citroen C-Zero and Peugeot i

Fri Jan 24, 2014 1:09 pm

I loaded my firmware before the new year, 2.5.5 I believe. I'm also having issues with the app not getting updated. This started yesterday. Also, when I got home yesterday, my car freaked out and gave me RBS (Regen Brake System), EV warning, ASC active, and ASC off lights and the car gave me ready dings twice. Check out the thread "i-MiEV Crashed".

Also, as shown here, I'm now getting temperatures, which I didn't have before. I haven't updated the module since I installed it and loaded the experimental firmware back in December.
https://www.dropbox.com/s/a551qbnocyxk0 ... -47-11.png

Here's the new notification:
https://www.dropbox.com/s/qe4tj4f5jqjpx ... -47-25.png

Here's the lights. It acted like the module fuzzed the CAN bus. I've noticed similar behavior when opening the OBDLink app, which attempts to talk to the car with various protocols. I'll verify tonight.
https://www.dropbox.com/s/q36delnjw1w78 ... 165148.jpg

After restarting the car, the lights were off.
:idea: :idea: :idea: :!: :!:

Dropbox maintenance in progress. If any of my links aren't working after November 17, please PM me and let me know which one isn't working.

Thanks.

TestO
Posts: 23
Joined: Sat Apr 07, 2012 9:01 am
Location: Norway

Re: OVMS for Mitsubishi i-Miev, Citroen C-Zero and Peugeot i

Fri Jan 24, 2014 1:15 pm

I don't know when Mark is going to compile a new version. If you want I can send you the version I'm testing.
Had been great to have someone else testing the new code. Especially the format conversion for cars configured for miles.

TestO
Posts: 23
Joined: Sat Apr 07, 2012 9:01 am
Location: Norway

Re: OVMS for Mitsubishi i-Miev, Citroen C-Zero and Peugeot i

Fri Jan 24, 2014 1:33 pm

PV1 wrote:I loaded my firmware before the new year, 2.5.5 I believe. I'm also having issues with the app not getting updated. This started yesterday. Also, when I got home yesterday, my car freaked out and gave me RBS (Regen Brake System), EV warning, ASC active, and ASC off lights and the car gave me ready dings twice. Check out the thread "i-MiEV Crashed".

Also, as shown here, I'm now getting temperatures, which I didn't have before. I haven't updated the module since I installed it and loaded the experimental firmware back in December.
https://www.dropbox.com/s/a551qbnocyxk0 ... -47-11.png

Here's the new notification:
https://www.dropbox.com/s/qe4tj4f5jqjpx ... -47-25.png

Here's the lights. It acted like the module fuzzed the CAN bus. I've noticed similar behavior when opening the OBDLink app, which attempts to talk to the car with various protocols. I'll verify tonight.
https://www.dropbox.com/s/q36delnjw1w78 ... 165148.jpg

After restarting the car, the lights were off.


The strange temperature is a known bug. Earlier versions didn't support negative motor temperature values. Since the i-Miev is report the temperatures in Celsius you will see this at freezing temperatures.
This will be fixed in the new version.

I have also had the error light issue twice with an older version. Haven't seen this issue with the later versions of the code. I believe this is related to a SW crash and a restart of the module. The newest version looks more stabile and also more responsive.

PV1
Site Moderator
Posts: 2990
Joined: Fri Apr 27, 2012 4:22 pm
Location: Pittsburgh, PA
Contact: Website

Re: OVMS for Mitsubishi i-Miev, Citroen C-Zero and Peugeot i

Fri Jan 24, 2014 1:37 pm

OK. That's along the lines of what I was thinking that caused it.

What's weird is that I've never had temperatures before.

Let me know when the latest firmware will be available.
:idea: :idea: :idea: :!: :!:

Dropbox maintenance in progress. If any of my links aren't working after November 17, please PM me and let me know which one isn't working.

Thanks.

PV1
Site Moderator
Posts: 2990
Joined: Fri Apr 27, 2012 4:22 pm
Location: Pittsburgh, PA
Contact: Website

Re: OVMS for Mitsubishi i-Miev, Citroen C-Zero and Peugeot i

Fri Jan 24, 2014 3:55 pm

I fuzzed the CAN bus with an app. I got the same lights to come on, but without the other fanfare. Is it possible that a dead short of the CAN bus for less than half a second would act like turning the key off then right back on? With the car in READY, turning the key off, then right back on without going to START will result in the car going to 'auto-READY'.
:idea: :idea: :idea: :!: :!:

Dropbox maintenance in progress. If any of my links aren't working after November 17, please PM me and let me know which one isn't working.

Thanks.

martinwinlow
Posts: 57
Joined: Sat Sep 01, 2012 3:02 am

Re: OVMS for Mitsubishi i-Miev, Citroen C-Zero and Peugeot i

Sun Feb 02, 2014 11:57 am

Hi,

I am trying to get my Peugeot Ion (Mitsubishi i-Miev) working with my OVMS module using a GeoSim. I have configured it and can get SMS responses and an accurate GPS location report. However, in response to a STAT? SMS I am still only getting:

xx:xx:xx
Not charging
SOC: 0%

I also get:-

Module:
VehicleID:(my correct vehicle ID)
VehicleType:MI
Units:M
Notifications:SMSIP

… to a MODULE? request.

In response to VERSION…

OVMS Firmware version:
2.6.2//V2

Anyone got any clues? MW

PV1
Site Moderator
Posts: 2990
Joined: Fri Apr 27, 2012 4:22 pm
Location: Pittsburgh, PA
Contact: Website

Re: OVMS for Mitsubishi i-Miev, Citroen C-Zero and Peugeot i

Sun Feb 02, 2014 12:10 pm

Have you loaded the experimental firmware from GIThub?
:idea: :idea: :idea: :!: :!:

Dropbox maintenance in progress. If any of my links aren't working after November 17, please PM me and let me know which one isn't working.

Thanks.

TestO
Posts: 23
Joined: Sat Apr 07, 2012 9:01 am
Location: Norway

Re: OVMS for Mitsubishi i-Miev, Citroen C-Zero and Peugeot i

Sun Feb 02, 2014 1:19 pm

Have tested the 2.6.2 OMVS FW with the latest MI code for a week. So far it look to OK
The latest MI code is pushed to GitHub : https://github.com/openvehicles/Open-Vehicle-Monitoring-System

For those of you not able to build form source yourself, you can download the HEX file from here: https://dl.dropboxusercontent.com/u/7144634/OVMS.X.production.hex.020214.zip

Please report if you experience any bugs.

martinwinlow
Posts: 57
Joined: Sat Sep 01, 2012 3:02 am

Re: OVMS for Mitsubishi i-Miev, Citroen C-Zero and Peugeot i

Sun Feb 02, 2014 4:25 pm

Thanks for the replies.

After I reset the OVMS module (by unplugging the ODB connector and reconnecting it) in response to STAT? I got
00:55:26 (time since last reset?)
Not charging (it isn't)
SOC: 0% (it should be near 100%)
ODO: 7,319.0 mi (its only done about 4 and a bit K miles - is this kms? I'll check in the morning)

"Have you loaded the experimental firmware from GIThub?"… Er, thought so but I've just had a look back there and can't find anything that looks remotely like a source file (or hex for that matter). It is not wildly obvious where I should be looking…

The hex file I used to flash my OVMS module was called 'OVMS i-Miev compatible HEX code - vehicle_mitsubishi.hex' and I downloaded it on 19Jan2014, if that helps.

I'll try this hex file tomorrow suggested by TestO…

https://dl.dropboxusercontent.com/u/714 ... 020214.zip

… but it would be interesting to see the source code too. Bed time.

MW

jjlink
Site Moderator
Posts: 398
Joined: Sun Sep 11, 2011 8:26 am
Location: San Francisco Bay Area, CA

Re: OVMS for Mitsubishi i-Miev, Citroen C-Zero and Peugeot i

Sun Feb 02, 2014 4:41 pm

TestO wrote:Have tested the 2.6.2 OMVS FW with the latest MI code for a week. So far it look to OK
The latest MI code is pushed to GitHub : https://github.com/openvehicles/Open-Vehicle-Monitoring-System

For those of you not able to build form source yourself, you can download the HEX file from here: https://dl.dropboxusercontent.com/u/7144634/OVMS.X.production.hex.020214.zip

Please report if you experience any bugs.


OK, its up and running on my box now.

i-MiEV: OVMS Firmware version: 2.6.2/MI/V2

Thanks
John - 2012 Silver i-MiEV SE model, Jan 19th, 2012 w/OpenEvse, caniOn,& OVMS.

Return to “Instruments - Radio/USB/Nav - CAN - Climate Controls - Remote”