Print view
Move to folder
Message history - Re: Hi, new user, not sure how/where to post topic
Author Message
admin
Message subject: Re: Hi, new user, not sure how/where to post topicFolder: Inbox
Hi, welcome to the forum!
It doesn't matter too much where you post it - if it's in the wrong section, one of the moderators will simply move it.
I'd recommend one of these sections:
General / Main Owners Forum: viewforum.php?f=9
Or perhaps even the Charging Stations section: viewforum.php?f=24
Hope that helps!
Mike
Sent: Tue May 24, 2016 7:52 pm
View message Reply with quote Reply to message
HRM
Message subject: Hi, new user, not sure how/where to post topicFolder: Sent messages
Hi,
I wanted to post the following but not sure how/where (what group) to post to.
Please advise. Thanks,
=========
Hi all,
Just joined the forum and proud owner of a 2010 iMiev SE.
A sticker on the back of Mitsubishi iMiev charger says the following:
Input Voltage: (Unit Automatically Adjusts)
100-140V - 16A (typically 12A/1.44kW)
200-250V - 24A (typically 20A/4.8KW)
AC only 50/60HZ - Use on dedicated circuit
Here is how the charger gets connected to 110v household power:
charger has L6-20P connector -> L6-30R 12" cable to 110v household plug
I wanted to ask if I could replace the 12" cable (that has 110v household plug on one end and L6-30R on the other end) with a cable that has L6-30R and 220V L14-30P (220v dryer plug). Can I hope that the charger won't blow up?
Thanks,
Move to folder
Message history - Re: Hi, new user, not sure how/where to post topic
Author Message
admin
Message subject: Re: Hi, new user, not sure how/where to post topicFolder: Inbox
Hi, welcome to the forum!
It doesn't matter too much where you post it - if it's in the wrong section, one of the moderators will simply move it.
I'd recommend one of these sections:
General / Main Owners Forum: viewforum.php?f=9
Or perhaps even the Charging Stations section: viewforum.php?f=24
Hope that helps!
Mike
Sent: Tue May 24, 2016 7:52 pm
View message Reply with quote Reply to message
HRM
Message subject: Hi, new user, not sure how/where to post topicFolder: Sent messages
Hi,
I wanted to post the following but not sure how/where (what group) to post to.
Please advise. Thanks,
=========
Hi all,
Just joined the forum and proud owner of a 2010 iMiev SE.
A sticker on the back of Mitsubishi iMiev charger says the following:
Input Voltage: (Unit Automatically Adjusts)
100-140V - 16A (typically 12A/1.44kW)
200-250V - 24A (typically 20A/4.8KW)
AC only 50/60HZ - Use on dedicated circuit
Here is how the charger gets connected to 110v household power:
charger has L6-20P connector -> L6-30R 12" cable to 110v household plug
I wanted to ask if I could replace the 12" cable (that has 110v household plug on one end and L6-30R on the other end) with a cable that has L6-30R and 220V L14-30P (220v dryer plug). Can I hope that the charger won't blow up?
Thanks,