Page 1 of 1


Posted: Wed Sep 04, 2019 5:28 pm
by deemsh
I replaced the main battery with a used pack and the battery looks good with only 0.010 volts difference between cells after running the battery hard. Now I need to reset or calibrate battery capacity. The cells are above 3.9 volts when I am down to 2 bars and less than 10 miles range showing.

Has anyone had luck running one of those Chinese MUT 3 clones on a virtual XP machine?


Posted: Mon Nov 11, 2019 7:30 pm
by Serhge
X431 ,
elm327 + hobdrive,
maybe something else can